Product Description
TT-01-406080A Sailor 6080 Power Supply
The TT-6080A AC/DC Power Supply can deliver 300 W output power on average with a peak of 370 W for a minimum of 2 minutes.
The AC/DC Power Supply has an on/off switch, It is lit when the power is turned on.
All connectors are placed at the same end of the power supply to simplify mounting and installation, the connector panel is protected by a transparent lid.
To secure an installation with heavy cables an optional Wall Tray / cable relief bracket can be installed(order part# TT-01-406080A-001)
Overview
TT-01-406080A
When mounted vertically the AC/DC Power Supply fulfills IP32 in areas with more than 42 V and IP22 in other areas.
This means that the unit is protected against the intrusion of solid objects (including body parts like fingers), dust, water etc.
When mounted vertically the AC/DC Power Supply fulfills IP32 in areas with more than 42 V and IP22 in other areas.
This means that the unit is protected against the intrusion of solid objects (including body parts like fingers), dust, water etc.
When more power is needed than one power supply can give, i.e. 300 W, you can stack up to three power supplies on top of each other and connect them.
When stacking 2 or 3 units the load on each of the units is automatically balanced among the units.
Stacking multiple units
You can mount up to three AC/DC Power Supply units in a vertical (recommended to use the Wall Mounting Tray and cable-relief bracket, heavy duty, order number: Part# 406080A-001) or horizontal position.
When mounted in a vertical position, with the connector panel pointing downwards, the unit fulfills IP32 in areas with more than 42 V and IP22 in other areas.
The mounting holes in the AC/DC Power Supply are designed in such a way that units fit nicely on top of each other when being stacked.
IMPORTANT NOTE
To ensure adequate cooling of the AC/DC Power Supplies an unobstructed space of minimum 5 cm must be maintained around all sides of the group of units (except between the units and the bottom side).
The AC/DC Power Supply has the following features:
IEC 60945 Maritime approval
Two DC connectors, output, range: 28.7 V – 31.2 V
Output power 300 W continuous, 370 W peak (2 min., 100-240 VAC) or 270 W continuous, 333 W peak (2 min., 90-100 VAC)
AC input (100-240 VAC operating) with fuse (6.3 A)
Automatic selection of input voltage range
AC alarm
On/off switch
Daisy-chaining of up to three units to give up to 900 W.1
Short circuit protection
Over-temperature protection (shutdown with automatic restart)
Battery switch-over in case of AC supply failure, secured by 2 fuses (30 A)
No forced cooling required
IP 3X for internal high voltage areas (>42 V), IP 2X in other areas
IP X2 when vertically mounted (wall) and connector panel is facing down
Tech Specs
TT-01-406080A
The following tables show the electrical and environmental specifications of the AC/DC Power Supply.
Specifications Value
Output power at 100 VAC – 240 VAC 300 W continuous, 370 W peak (2 min.)
Output power at 90 VAC – 100 VAC 270 W continuous, 333 W peak (2 min.)
DC output (nominal) 31.2 VDC at 0 A, 29.3 VDC at 10 A, 28.7 VDC at 13 A
AC input voltage 115-230 VAC nominal, 100-240 VAC operating
Alarm: In case of AC power failure
IP rating in high voltage (>42 V) IP 3X
IP rating in other areas IP 2X
IP rating when mounted vertically on a wall IP X2
Operating temperature -25° to 55° C
Storage temperature -40° to 80° C
Cooling: No forced cooling required.
Survival temperature (power on) -40° to 80° C
Dimensions: H: 46.5 mm, L: 354 mm, W: 265 mm
Weight Approx. 3.7 kg
Compass safe distance 30 cm
NOTE: Output power capability depends on the mounting position (horizontal or vertical), input voltage, ambient temperature and ventilation at the place of installation.
