Overview

STARPAK-S5BL-XT-1
Outstanding Performance with Design for secure GPS Satellite Access.
Cost effective, high performance antenna solution.
Stylish “Tail Fin” / Blade design.
Designed for harsh high-heat or low temperature extreme, and corrosive environments.
Compatible with all GPS satellite devices.
RoHS compliant
Made in USA,
For use with the GPS Satellite Network.
Alternate Colours and also Cable/s available.

Tech Specs

STARPAK-S5BL-XT-1
Antenna Design: Helix
Profile: Commonly referred to as Fin, Tail Fin or Blade style
BASICS
Mounting
Connector: Base Exit, TNC-Female
Mounting: Flat fixed Mount, with gasket and 4x 10-32 Stainless Steel Mounting Screws Supplied

ANTENNA SPECS:
Mechanical
Height: 117.48mm(4.630in)
Length: 133.35(5.25in)
Width: 44.46(1.75in)
Antenna Weight: 146g(5.15oz).
Material: 6061-T6 Aluminum Alloy base, Composite Radome, Impact, Abrasion, UV, Solvent, and Fire Retardant
Finish: Skydrol Resistant Polyurethane Enamel Base Iridite PER/ MIL-C-5441F
Environmental
Extreme Low to very High Temperature Operating Range -55° to 85°C (-67° to 185°F)
Altitude: 21.336m(70,000ft)
Vibration: 30 G’s
Leakage: Hermetically Sealed

L1 GPS TECHNICAL SPECIFICATIONS
Frequency: (1575.42 ± 15) MHz
Radiation Pattern: Hemispherical
Polarization: RHCP
VSWR: <1.5:1 Impedance: 50ohms Gain(bBlc) ............................Free Space. -.. 4ft G.P. @ 90° (ZENITH) -........... 4.6...-. 2.9 @ 10°.................-...........-2.5...-.-1.8 @ 20°................ -...........-1.1...-.-0.7 @ 30°................ -...........-0.5...-. 1.7 @ 60-90°............-.......> .3.6…-.. 2.1
BEAM WIDTH(3dB)……103Deg.-..146Deg
Axial Ratio: 2dB
Power Handling: 1W
Lightning Protection: DC Grounding

LNA OPTION FOR GPS
LNA Noise Figure: 33dB Gain
LNA P1dB Out: 3.0dB
LNA DC Power: 2.5V/20mA, 3V/29mA, 3.3V/35mA,(2.5-24)V/<50mA Rejection @(-50/ 50)MHz: -40dB / -40dB Rejection @(-100/ 100)MHz: <-65dB Power Handling: 50Watts CW(without LNA), 1Watt CW(with LNA) Network, USA Federal, and Military Specifications Manufactured in USA Compatible with GPS L1 Satellite Networks. DO-160D, DO-228, MIL-C-5541 MIL-E-5400, MIL-I-45208A, MIL-STD-810 and SAEJ1455 Acceptance Test Procedure: ATP-GPS-L1L2-100 MANUFACTURER COMPLIANCE 1) ISO 9001-2008: Registered through SGS 2) TSO C-144: Registered through FAA 3) Environmental: TCA/DO-160D, TSO C144 4) Lightning: DO-160F, Direct Effects, Section 23 5) Electrical: TSO C144, RTCA/DO-228/DO-254, Mil-STD-461F 6) CE: EMC Directive 89/336/EEC European Union) & 47CFR, Part 15, Subpart B (FCC) 7) EMC.Emission: EUROPEAN STANDARD EN 55022: 2006 / UNITED STATES STANDARD 47 CFR PART 15, SUBPART B 8) Immunity: EUROPEAN STANDARD EN 55024: 1998, Amendment A2: 2003 9) Pick/Place, Soldering, Circuit Boards: IPC JSTD-001D, IPC-A-610D, ESD-STD-20.20, JESD-625a, IPC-A-610C Class 3 10) Printed Circuit Board (PCB): IPC-A-600G. 11) Connectors/Adapters/Cables: MIL-PRF-39012/55339, IPC JSTD-001D 12) Stainless Steel Material for Screws: DFARS 252-225-7014/DFARS 225.872-1, and MS Standards. 13) Aluminum Material: A16061-T6 per ASTM-B-221. 14) Chem Film: Mil-C-5541F Type I Class 1A for Yellow, Type II Class 1A for Clear. 15) Black Anodize: MIL-A-8625F Type II Class II. 16) REACH Compliance: SVHC Candidate List Published by European Chemical Agency (ECHA) on Oct-28-2008 Regarding Regulation (EC) No 1907/2006 Concerning REACH 17) CAGE Code: 3CVE1; ECCN: 5A991.b.4; HTS: 8529104000 18) Country of Origin: USA. These commodities and technology are from the United States and exportable in accordance with the export Administration regulations. Diversion contrary to U.S. law is prohibited.