Product Description
IR-01-PILOT-ADE IRIDIUM Pilot, OpenPort Antenna, ADE Above Deck Equipment
ADE SPECIFICATIONS
Physical
• Height: 9.06 in (230mm)
• Diameter: 22.44 in (570mm)
• Weight: 24.25 lbs (11kg)
Mechanical
• Steering: Automatic solid state
• Coverage: Horizon to horizon
• Ship’s Motion: provides useful link margin up to roll = 20°
• Mounting M10 bolts arranged in a 15 cm diameter bolt circle
• Cable(ADE>BDE) Connector: Bulgin Buccaneer IP68 (9-pole fixed plug)
Electrical
• Type: 6 dual element azimuthal array and 1 zenith element, electronically switched and phase steered
• Polarization: RHCP
• Gain: 8 dB
• Beam Width: Hemispheric coverage (60° per element)
Environmental
• Enclosure Type RF-transparent dome-shaped cover and metal base
• Relative Humidity 0 to 93% RH
• Precipitation meets IPx6 (high pressure water jets)
• Wind in excess of 100 mph with proper mounting (see Installation Guide)
• Temperature -30° to 70° C (-22° to 158° F)
• Wind – In excess of 100 MPH (161 KPH) with proper mounting
• Environmental – IP 66 Compliant (Powerful water jets from any direction)
Cable – NOT Included
• Antenna Cable Length – (20 or 50 meters depending on purchase)
refer to User manual below for additional detailed specifications
Tech Specs
IR-01-PILOT-ADE Antenna mounting and substitution
The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the indicated minimum safe distance to the antenna: 1.0 m (3.3ft).
To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe distance shown above, and in accordance with the requirements of the antenna manufacturer or supplier.
Base Station Installation:
The antenna should be mounted on an outdoor permanent structure. RF Exposure compliance must be addressed at the time of installation.
You may contact your radio dealer or the manufacturer for further instructions.
You, as the qualified end user of this radio device, must control the exposure conditions of bystanders to ensure the minimum separation distance (above) is maintained between the antenna and nearby persons for satisfying RF Exposure compliance.
The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work-related use.
Transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna.
If you have any concerns about the adequacy of the mounting or support for the Iridium Pilot device, seek advice from a structural engineer or other qualified individual.
IMPORTANT NOTICE: Refer to the user instruction manual for further health and safety instructions
