Product Description
HN-00-3500509-0001 INMARSAT by Hughes 9502-M2M
The Hughes 9502 Kit (P/N 3500509-0001) is a two piece design that comes with:
Part# HN-01-3500563-0001, an Indoor Unit (IDU),
Part# HN-01-3500638-0001, an Outdoor Unit (ODU) and
Part# HN-01-3500638-0001, a 10 meter cable that has an N type connection at both ends and
Part# HN-01-3500634-0001, an N to TNC adapter supplied for connection to the IDU.
Mounting options are available, but NOT included
The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network(BGAN) for IP SCADA and machine-to-machine (M2M) applications.
Applications
The Hughes terminal delivers affordable, global, end-to-end IP data connectivity enabling applications in industry
sectors such as:
Environmental Monitoring,
SmartGrid,
Pipeline Monitoring,
Compressor Monitoring,
Well Site Automation,
Video Surveillance, and
Out-of-Band Management to Primary Site Communications.
Benefits
The exceptional low power consumption (<1 W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid.
This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solar battery arrays involving sensitive power budgets.
The Hughes 9502 includes 10 meters of RF cabling, granting the user freedom to position the antenna remotely and away from the transceiver in complex installations while securing the SIM card inside a premise or enclosure to better protect against unauthorized use, theft, and vandalism.
Future firmware releases would be uncommon, meanwhile any such modem update will qualify for no charge over-the-air (OTA) upgrades saving customers time and money.
At less than a penny or two per kilobyte, customers cannot find better value from comparable technologies.
Overview
HN-00-3500509-0001
Hughes 9502-M2M BGAN IP M2M Terminal Pack
No connection charge with BGAN M2M(normal BGAN charge is 100 Kbytes)
Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
No charge over-the-air modem software upgrades
Exclusive airtime packages unique to the Hughes 9502
Integrated IP Watchdog to ensure “always-on” network connectivity.
No manual intervention required to recover from an outage
Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
Ultra-low power consumption
Transmit: < 20 W
Narrow beam w/o transmit: 3 W
Idle (regional beam): < 1 W
Off (wake on packet): < 10 mW (@ 12 Vdc)
Off (wake on packet): < 30 mW (@ 24 Vdc)
Off (GPIO control): 0 W
Relay mode passes WAN IP address to the connected RTU
Security enhancements with extended layers of embedded security options
Basic installation; no PC required
Outdoor unit (ODU) can be pole mounted
Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
Built-in GPS receiver
Use of Internet Protocol (IP) via the BGAN satellite network
Security
o Ethernet MAC Filtering
o Administration Password
o SMS Control password
o White List for SMS control
o AT Command password lock
o SIM Personalization: Phone-to-SIM, DP SIM Lock, SP SIM Lock
Other Features:
o Single external BGAN Satellite and GPS antenna connection
o GPS module inside Indoor Unit
o 3 status LEDs
o Antenna pointing audio tone and voltage level indicator through audio jack
o SIM/USIM Slot (behind SIM door)
Tech Specs
HN-00-3500509-0001
Hughes 9502-M2M BGAN IP M2M Terminal Pack
Electrical
Satellite Transmit Frequency: 1626.5–1660.5 MHz
Satellite Receive Frequency: 1525–1559 MHz
GPS Frequency: 1574.42–1576.42 MHz
Input Voltage: 12 Vdc/ 24 Vdc nominal
Firmware Upgrades: Over the air or local
Mechanical
IDU Weight: 1.2 Kg (2.64 lbs)
IDU Dimensions: 150 x 200 x 45mm
ODU Weight: 1.9 Kg (4.18 lbs)
ODU Dimensions: 385 x 385 x 33mm
Environmental
Operating Temperature: -40° C to 75° C
Storage Temperature: -55° C to 75° C
Humidity: 95% RH at 40° C
ODU Wind Loading: Survival wind loading (with optional mount) up to 100 mph
IDU Water and Dust: IP-40 Compliant
ODU Water and Dust: IP-65 Compliant
Interfaces
Ethernet connection (RJ45)
USB 1.1 connection (USB Type-B) for PC to configure terminal
(requires installation of Hughes USB driver, see www.bgan.hughes.com )
TNC type RF connector on IDU and N-type RF connector on the ODU
Integrated GPS receiver and L-band ODU
RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver).
This port cannot be used for serial data
3 LED status display and a single function button
3.5 mm stereo audio jack for audio tone or voltage level to assist in ODU pointing
USIM card slot behind SIM door
9502 M2M(IDU) Mounting Profiles
The IDU can be mounted using the:
IDU strap (P/N 3500617-0001) if desired Strap will require 4 each mounting bolts either M3.5 or 6/32” (not included).
The Indoor unit (IDU) is housed inside building or NEMA 4x Enclosure / the remote terminal unit (RTU), NOT included.
Antenna(ODU) Mounting Profiles
The ODU can be mounted using the:
Basic Fixed Mount Kit (P/N 3004066-0002) or by using the
Azimuth elevation bracket (P/N 1022994-0022) and an existing 37mm(1.5in) diameter pole.
